TC Electronic P2 Level pilot
TC Electronic P2 Level pilot
TC Electronic P2 Level pilot
  • TC Electronic P2 Level pilot
31.118,75 DKK (24.895,00 DKK)

TC Electronic P2 Level pilot

Stereo Dynamic Processor for Post Production incl. 5 band Dynamics, EQ, AGC, ISP Limiter, PC Editor
P2 is a Realtime Loudness Controller, Multiband Processor and Limiter designed for use in video and post production.

The unit features one-key set-and-forget operation, while keeping hundreds of presets and parameters available for a system installer or the stations audio engineer. Units are easily cloned, facilitating maintenance of a large studio complex.

Ease of use is combined with ultimate internal precision, so maximum audio quality is always obtained, even under non-ideal input conditions. Up to 8 presets can be recalled using GPI. For expert presetting and remote control, a PC can be used to adjust all parameters utilizing the Icon program included.

P2 comes pre-loaded with a wide variety of international standard presets to be used out of the box, or as starting points for further adjustments. Balanced and unbalanced AES/EBU I/O is standard, and outputs are always active. Sample rate conversion can be invoked when using digital inputs.

Analog I/O is standard and outputs are always active. The 24 bit converters are scaled in the analog domain, with scaling under preset control, to minimize noise and maximize headroom under all operating conditions.

Technical specifications
Digital Inputs and Outputs
Connectors XLR (AES/EBU), RCA Phono (S/PDIF)

Formats AES/EBU (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 958

Output Dither HPF TPDF dither 8-22 bit

Word Clock Input BNC, 75 ohm, 0.6 to 10 Vpp

Sample Rates 32 kHz, 44.1 kHz, 48 kHz

Processing Delay 0.5 ms @ 48 kHz

Additional Delay 0-400 ms at all sample rates

Frequency Response DIO DC to 23.9 kHz ± 0.01 dB @ 48 kHz

Sample Rate Conversion
Type Asynchronous

Dynamic Range 120 dB

THD+N -106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS

Input Rate Range 31 kHz to 49 kHz

Analog Inputs
Connectors XLR balanced (pin 2 hot)

By-pass Through relay

Impedance 40 ohm (balanced)

Max. Output Level +26 dBu (balanced)

Full Scale Output Range -4 dBu to +26 dBu (balanced)

D to A Conversion 24 bit (1 bit, 128 times oversampling)

D to A Delay 0.57 ms @ 48 kHz

Dynamic Range >100 dB (unweighted), >104 dB(A)

THD -86 dB (0.005 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu)

Frequency Response 10 Hz to 20 kHz: +0/-0.5 dB

Crosstalk <-60 dB, 10 Hz to 20 kHz, typical -90 dB @ 1 kHz

EMC
Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B CISPR 22, Class B

Safety
Certified to IEC 60065, EN 60065, UL 6500 and CSA E65 CSA FILE LR108093

Environment
Operating Temperature 32° F to 122° F (0° C to 50° C)

Storage Temperature -22° F to 167° F (-30° C to 70° C)

Humidity Max. 90% non-condensing

PCMCIA Interface
Connector PC Card, 68 pin type 1 cards

Standards PCMCIA 2.0, JEIDA 4.0

Card Format Supports up to 2 MB SRAM

Control Interface
RS232 9 Pin SUB-D

GPI, Pedal, Fader 1/4 inch phone jack

General
Finish Anodized aluminum face and top plate. Plated and painted steel chassis development

LCD 56 x 128 dot graphic LCD-display

Dimensions 19" x 1.75" x 8.2" (483 x 44 x 208 mm)

Weight 5.2 lb. (2.35 kg)

Mains Voltage 100 to 240 VAC, 50 to 60 Hz - (auto-select)

Power Consumption < 20W

Backup Battery Life > 10 Years

Warranty
Parts and labor 1 year
Varenummer
9514000
text_Product_Weight
2500 gr.

Tak

Følgende produkt(er) er nu lagt i kurven

Køb mere