TC Electronic D22 - On-Line Broadcast Delay
TC Electronic D22 - On-Line Broadcast Delay
TC Electronic D22 - On-Line Broadcast Delay
  • TC Electronic D22 - On-Line Broadcast Delay
17.243,75 DKK (13.795,00 DKK)

TC Electronic D22 - On-Line Broadcast Delay

Stereo Digital Broadcast, 5 seconds
High resolution Delay for broadcast master control and linking. Delay-time may be adjusted while signal is being passed, thanks to a low artifact processing technique. The delay is easily adjustable from the front panel using dedicated Nudge keys, Encoder and Tap function. Increments can be set in ms, fields or frames, and the unit delays linear audio as well as Dolby E or AC3 streams. Remote control of by-pass and delay time is available through GPI or RS485 inputs. Balanced and unbalanced AES/EBU I/O is standard, and outputs are always active. Sample rate conversion can be invoked when using digital inputs.

Analog I/O is standard, and outputs are always active. The 24 bit converters are scaled in the analog domain, with scaling under preset control, to minimize noise and maximize headroom under all operating conditions.

technical specifications
Digital Inputs and Outputs
Connectors XLR (AES/EBU) RCA Phono (S/PDIF)

Formats AES/EBU (24 bit), S/PDIF (20 bit), EIAJ CP-340, IEC 958

Output Dither HPF TPDF dither 8-24 bit

Word Clock Input BNC, 75 Ohm, 0.6 to 10 Vpp

Sample Rates 32 kHz, 44.1 kHz, 48 kHz

Processing Delay 0.5 ms @ 48 kHz

Frequency Response DIO DC to 23.9 kHz ± 0.01 dB @ 48 kHz

Sample Rate Conversion Type Asynchronous

Dynamic Range 120 dB

THD+N -106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS

Analog Inputs
Connectors XLR balanced (pin 2 hot)

Impedance 20 kOhm (balanced)

Max. Input Level +27 dBu (balanced)

Min. Input Level (for 0 dBFS) -4 dBu (balanced)

A to D Conversion 24 bit (1 bit, 128 times oversampling)

A to D Delay 0.8 ms @ 48 kHz

Dynamic Range >103 dB (unweighted), >106 dB(A)

THD -95 dB (0.0018 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu)

Frequency Response 10 Hz to 20 kHz: +0/-0.2 dB

Crosstalk <-80 dB, 10 Hz to 20 kHz typical -100 dB @ 1 kHz

Analog Outputs
Connectors XLR balanced (pin 2 hot)

Bypass Through relay

Impedance 40 Ohm (balanced)

Max. Output Level +26 dBu (balanced)

Full Scale Output Range -4 dBu to +26 dBu (balanced)

D to A Conversion 24 bit (1 bit, 128 times oversampling)

D to A Delay 0.57 ms @ 48 kHz

Dynamic Range >100 dB (unweighted), >104 dB(A)

THD -86 dB (0.005 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu)

Frequency Response 10 Hz to 20 kHz: +0/-0.5 dB

Crosstalk <-60 dB, 10 Hz to 20 kHz typical -90 dB @ 1 kHz

EMC
Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B CISPR 22, Class B

Safety
Certified to IEC 65, EN 60065, UL 1419 and CSA E65

Environment
Operating Temperature 32° F to 122° F (0° C to 50° C)

Storage Temperature -22° F to 167° F (-30° C to 70° C)

Humidity Max. 90% non-condensing

PCMCIA Interface
Connectors PC Card, 68 pin type 1 cards

Standards PCMCIA 2.0, JEIDA 4.0

Card Format Supports up to 2 MB SRAM

Control Interface
RS485/RS422 In/Out/Through: 5 Pin DIN

GPI, Pedal, Fader 1/4 inch phone jack

General
Finish Anodized aluminum face and top plate, Plated and painted steel chassis

LCD 56 x 128 dot graphic LCD-display

Dimensions 19" x 1.75" x 8.2" (483 x 44 x 208 mm)

Weight 5.2 lb. (2.35 kg)

Mains Voltage 100 to 240 VAC, 50 to 60 Hz (auto-select)

Power Consumption <20 W

Backup Battery Life >10 years
Varenummer
9511000
text_Product_Weight
4400 gr.

Tak

Følgende produkt(er) er nu lagt i kurven

Køb mere