Nautel VS300 300W FM transmitter digital Stereo
Nautel VS300 300W FM transmitter digital Stereo
Nautel VS300 300W FM transmitter digital Stereo
Nautel VS300 300W FM transmitter digital Stereo
Nautel VS300 300W FM transmitter digital Stereo
Nautel VS300 300W FM transmitter digital Stereo
  • Nautel VS300 300W FM transmitter digital Stereo
  • Nautel VS300 300W FM transmitter digital Stereo
  • Nautel VS300 300W FM transmitter digital Stereo
  • Nautel VS300 300W FM transmitter digital Stereo
0,00 DKK (0,00 DKK)

Nautel VS300 300W FM transmitter digital Stereo

300W FM transmitter with integral digital exciter, 180-264VAC, N connector output
Many transmitters in the 300 W to 2.5 kW class use an inexpensive analog exciter that is sometimes an external unit.

In the VS Series, not only did Nautel engineers integrate the exciter, they implemented a true direct-to-channel digital exciter to achieve class leading performance. That means crystal clear audio and outstanding value. A great achievement considering that digital exciters alone usually sell for over US $10,000.

The VS300 with its built in RDS generator, gps input, powerful presets and -90dB SNR makes for a powerful and extremely cost-effective replacement exciter.

Ge n e r a l
Transmitter Type
FM Broadcast, 100% solid state
Configuration
One power amplifier with one switching power supply
One pre-amplifier with one switching power supply
Integrated exciter/controller
RF Output Power
8 W to 330 W into a 1.2:1 VSWR
8 W to 300 W into a 1.5:1 VSWR
RF Output Connection
Type 'N' standard
7/16" DIN, female optional
RF Output Impedance
50 ohms unbalanced
Efficiency
62% typical at 300 W
RF Load VSWR
1.5:1 - Automatic power reduction into higher
VSWR
Protected from open and short circuits at all
phase angles
RF Frequency Range
87.5 MHz to 108 MHz in 10kHz steps
No tuning required
Spurious and Harmonic
Meets or exceeds all FCC/IC/CE requirements
E x c i t e r /
C o n t r o l l e r
Exciter
Integrated analog FM exciter using direct-tochannel
digital modulation
Built-in RDS encoder, SCA encoder and Stereo
generator
Audio Sources
AES, Analog L/R, Composite, Audio Player (IP
stream/USB)
Up to four audio sources may be enabled with
priority levels
Audio Player Inputs
Ethernet connection (IP audio stream): Shoutcast,
RTP, Livewire
USB drive (Audio files): MP3, PCM
Audio Backup
Automatic failover to backup audio source in the
event that main audio source becomes unavailable
F M S i g n a l - t o -
n o i s e R a t i o
Digital or Analog Stereo Input
80 dB below 100% modulation (reference 400 Hz,
measured in 22 Hz to 22 kHz bandwidth with 75 μs
de-emphasis and DIN 'A' weighting)
Monaural Digital/Analog or Wideband
Composite Operation
90 dB below 100% modulation (reference 400 Hz,
measured in 22 Hz to 22 kHz bandwidth with 75 μs
de-emphasis and DIN 'A' weighting)
AC I n p u t
Voltage
180 V ac to 264 V ac, 1 phase, 50/60 Hz
Power Consumption
484 W at 300 W RF output (510 VA) typical
Power Factor
Unity Power Factor Corrected (typically 0.95)
Power Line Harmonics
IEEE 519-1992
H D U p g r a d e
Upgrade to digital is achieved with the addition
of an external 2RU VS HD box. The HD upgrade
provides the Exgine card and iBiquity software
necessary to broadcast your signal in HD
The VS HD has no user interface and is controlled
locally or remotely from the VS Series display or
AUI.
Dokument(er)
V300_ss_w_1.2.pdf (131 kb)
Varenummer
VS300-N
text_Product_Weight
15000 gr.

Tak

Følgende produkt(er) er nu lagt i kurven

Køb mere