DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
  • DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
  • DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
  • DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
  • DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
  • DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
  • DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232
11.875,00 DKK (9.500,00 DKK)
Du sparer 6,17% Førpris: 12.656,25 DKK (10.125,00 DKK)

DEVA SmartGen 6.0 RDS Encoder w/LAN, USB & RS232

Dynamic RDS Encoder, RS-232, USB & TCP-IP Ports, UECP Compatible, GPS Time Sync
This RDS encoder from DEVA Broadcast is based on the latest RDS technology, SmartGen 6 guarantees fully digital synthesis of the RDS signal, with excellent quality and spectral purity. This advanced device is a cost-effective solution for sending of TMC, EWS Services and song tagging via the supported RT+ function.

The local (RS232, USB) and remote (TCP/IP, UDP/IP) interfaces permit fast and full integration of the RDS/RBDS encoder to the station's other functions, including message streams for digital radio and Webcasting. SmartGen 6 is supplied with two separate outputs - one for RDS+MPX and one for RDS only. The need of highly-accurate time source is satisfied not only by the supported SNTP but also by the built-in GPS Module.

An impressive feature of SmartGen 6 is the SNMP agent software component, which reports information via SNMP to one or more administrative computers (managers). SmartGen 6 complies with SNMPv2C. The function SNMP traps or E-mail notification on user-defined alerts is also available.

Fully Digital Synthesis of RDS signal with excellent quality and spectral purity
Fully independent RDS decoder for self-monitoring purposes
Front panel LCD Display and Buttons for operating without a computer
Remote configuration via ASCII or UECP protocols through RS232, LAN, USB
Supported Network Protocols: HTTP, FTP, SNMP, SMTP, UpNP, UDP and TCP
4 x user-defined GPO, allowing easy management of external devices when needed
2 x General Purpose Inputs with user-defined functionality
Includes the TA function for traffic message priority override
Alert notifications on user-defined events via SNMP traps or E-mails
Real time clock Schedules for Scrolling Text and text lists
Custom HTML formatted E-mail templates with dynamic variables
SNTP & GPS module for automatic synchronization of the built-in clock
Supports European CENELEC and United States NRSC standards
Attractive price and very good price-performance ratio
Full support of Open Data Applications
Supports RT+ for songs and content tagging
PS & Radio Text Scrolling Options
Supports TMC (Traffic Message Channel)

Compatible with EWS (Emergency Warning System)
Embedded WEB server for interactive supervision
Fully compatible with UECP EBU SPB490 Version 7.05
MPX Loopthrough & Sidechain Modes
Internal or external Pilot / MPX synchronization
Very Intuitive UECP Configuration Software
Remote RDS viewer to visualize broadcasted data
Proved and reliable hardware for 24/7/365 operating
Easy Installation and Setup
LAN, USB & 2 x RS-232 Interfaces
Embedded SNMP agent permitting active management tasks
Interfaces with all popular radio automation systems
Built-in dedicated 19kHz source for internal sync
Built-in failsafe bypass relay
Separate outputs for RDS+MPX and for RDS only
Works with any FM exciter and stereo generator
Internal data diagnostics and transmission safeguards
19" Professional Case for high RF immunity.

Technical Specifications
Chassis Dimensions 1U x 19" x 7"; 44 x 485 x 178mm
Shipping Weight 2kg
Power Supply Internal 100 - 240V; 50 - 60Hz
Pilot/MPX Input Yes
MPX/RDS Output 0 to 4095 mV
Inputs/Outputs 2 x GPI, 4x GPO user-defined functionality
Communication Port 2xRS232, USB, LAN
Synchronization External (Pilot or MPX) / Internal / Auto
Synchronization Monitoring Yes
RDS Level adjustment Digitally controlled
Phase adjustment Yes, 0 ÷ 359.9°
Separate outputs for RDS+MPX and for RDS only Yes
Command to activate the RDS SCA Yes
Side Chain Mode, Loop through mode, Bypass feature Yes
RDS Subcarrier 100% Digitally Generated Shape / Bypass: 0 dB
Pilot synchronization Input Level: -50dBu to +12dBu / Frequency: 19kHz, ±3Hz
EN50067 compliant Yes
Accurate Clock Time (CT) Sync with Internet Connection Yes
Remote TA actuation for Traffic Announcements Yes
GPS module for automatic synchronization of the built-in clock Yes
Fully independent RDS decoder for self-monitoring purposes Yes
Firmware can be upgraded in the field Yes
Front-panel LCD displays all programmed data Yes
Data may be entered on-site with Front-panel Buttons Yes
Operating Temperature 0°C ÷ 55°C
RDS Features
Group supported All
Group Sequence Configurable
PS 6 DSN x 4 PSN
PI 6 DSN x 4 PSN
PTY RDS/RBDS
AF Method A 25
AF Method B up to 100
RT Yes, 10 messages
RT rate adjustment Group Sequence
RT+ for songs and content tagging Yes
TP Yes
TA Control Command, Contact closure, Software
PTYN Yes
EON 4 PSN
CT Yes
TMC, EWS, IH, TDC Yes
Free Format Groups (FFG) Yes
Open Data Application (ODA) Yes
64-character Dynamic PS shown on all RDS/RBDS Radios Yes
Auto "parses" long messages for best text display Yes
Scrolling by character from 1 up to 8
Scrolling by word, Auto centering, Truncate long words Yes
Communication
Communication Interfaces 2xRS232, USB, LAN
Connection with Automation Software Yes
Network Connectivity 2 TCP ports; 2 UDP ports
Scheduler Yes
Configuration Embeded Web Server, SmartGen Manager
Password Protection Yes
ASCII Protocol Yes
UDP, TCP, HTTP, SNTP Yes
Alert notifications oDokument(er)
smartgen6-brochure.pdf (428 kb)
Producent:
DEVA
Prod. varenr.:
RDS-SG6
Varenummer
DV-RDS-SG6
text_Product_Weight
4000 gr.

Tak

Følgende produkt(er) er nu lagt i kurven

Køb mere