DEVA SmartGen 3.1 RDS Encoder with USB
DEVA SmartGen 3.1 RDS Encoder with USB
DEVA SmartGen 3.1 RDS Encoder with USB
DEVA SmartGen 3.1 RDS Encoder with USB
  • DEVA SmartGen 3.1 RDS Encoder with USB
  • DEVA SmartGen 3.1 RDS Encoder with USB
4.187,50 DKK (3.350,00 DKK)
Du sparer 2,90% Førpris: 4.312,50 DKK (3.450,00 DKK)

DEVA SmartGen 3.1 RDS Encoder with USB

Rack Mountable Basic RDS/RBDS Encoder
The DEVA Broadcast SmartGen 3.1 can transmit all the basic RDS information plus, at your option: decoder information, music/speech flags, PS and radio text scrolling options, a fully digital synthesis of the RDS signal, and two types of operating modes - Loop-through & Side-chain.

The USB connectivity makes the programming of the non-volatile memory very simple - a dedicated and intuitive Windows® interface has been included on the CD-ROM, which comes with the SmartGen 3.1 encoder. After completing the programming procedure, the unit can be disconnected and re-installed at the transmitter site. Using the SmartGen Basic RDS/RBDS Encoders Manager, all the RDS programming information can be saved as a file before, after, or instead of sending the information to the encoder. This could be very useful when various programming segments throughout the broadcast day have program-specific RDS settings or messages, or for changing advertising or station promos at random.

Very Attractive Price
Very Good Price-Performance Ratio
PS & Radio Text Scrolling Options
Fully Digital Synthesis of RDS signal
MPX Loopthrough & Sidechain Modes

Internal or external Pilot / MPX Synchronisation
Very Intuitive Windows Configuration Software
Proved and reliable hardware for 24/7/365 operating
Built-in dedicated 19kHz source for internal sync
Works with any FM exciter and stereo generator

Supports both RDS & RBDS standards
Easy Installation and Setup
USB Programming Interfaces
Built-in failsafe bypass relay
19" Case for high RF immunity
SmartGen 3.1 Encoder is a quick and inexpensive way to have an RDS/RBDS included. The SmartGen 3.1 is able to transmit basic RDS information such as the Program Service name(PS), Program Identification(PI), Alternative Frequencies(AF), Program Type(PTY). Decoder Information and Music / Speech flag are also supported. USB connectivity makes it easy to program the non-volatile memory using any PC and the supplied Windows® software. After programming, the unit should be disconnected and re-installed on the transmitter site. Though it is not capable of "dynamic" messaging of the song titles, SmartGen 3.1 will identify your station by format and will display your station's "street name", continuously transmitting any station promo or advertising messages to your listeners.


Based on our more than 15 years of experience in the RDS field, the SmartGen Basic RDS/RBDS Encoders Manager was developed as a dedicated software for full management of our Basic RDS Encoders range as regards to the latest updates of the RDS/RBDS Standards.

Technical Specifications
Chassis Dimensions 1U x 19" x 5"; 44 x 485 x 130mm
Shipping Weight 2kg
Power Supply Internal 100 - 240V; 50 - 60Hz
Pilot/MPX Input Yes
MPX/RDS Output 0 to 3199 mV
Inputs/Outputs No
Communication Port USB
Synchronization External (Pilot or MPX) / Internal / Auto
Synchronization Monitoring No
RDS Level adjustment with trim pot
Phase adjustment Yes
Separate outputs for RDS+MPX and for RDS only No
Command to activate the RDS SCA No
Side Chain Mode, Loop through mode, Bypass feature No
RDS Subcarrier 100% Digitally Generated Shape / Bypass: 0 dB
Pilot synchronization Input Level: -50dBu to +12dBu / Frequency: 19kHz, ±3Hz
EN50067 compliant Yes
Accurate Clock Time (CT) Sync with Internet Connection No
Remote TA actuation for Traffic Announcements No
GPS module for automatic synchronization of the built-in clock No
Fully independent RDS decoder for self-monitoring purposes No
Firmware can be upgraded in the field No
Front-panel LCD displays all programmed data No
Data may be entered on-site with Front-panel Buttons No
Operating Temperature 0°C ÷ 55°C
RDS Features
Group supported 0A, 2A
Group Sequence Fixed
PS 1
PI 1
AF Method A 7
AF Method B No
RT Yes, 1 message
RT rate adjustment Yes
RT+ for songs and content tagging No
TP Yes
TA Control Software
CT Yes
Free Format Groups (FFG) No
Open Data Application (ODA) No
64-character Dynamic PS shown on all RDS/RBDS Radios Yes
Auto "parses" long messages for best text display Yes
Scrolling by character from 1 up to 8
Scrolling by word, Auto centering, Truncate long words Yes
Communication Interfaces USB
Connection with Automation Software No
Network Connectivity No
Scheduler No
Configuration Software
Password Protection No
ASCII Protocol Yes
Alert notifications on user-defined events via SNMP traps or E-mails No
Embedded SNMP agent permitting active management tasks No
Custom HTML formatted E-mail templates with dynamic variables No
Supported Network Protocols: No
UECP Protocol No
PI <=> CALL Calculator Yes
Remote Display No
Supplied with Intuitive Software Yes
Comes with 2-years Limited Warranty YesDokument(er)
SmartGen_31_brochure.pdf (103 kb)
Prod. varenr.:
4000 gr.


Følgende produkt(er) er nu lagt i kurven

Køb mere