Axel Falcon XT Digital FM-Audio Processor 5-Band
Axel Falcon XT Digital FM-Audio Processor 5-Band
21.873,75 DKK (17.499,00 DKK)
Du sparer 7,66% Førpris: 23.687,50 DKK (18.950,00 DKK)

Axel Falcon XT Digital FM-Audio Processor 5-Band

Digital Audio Processor, a Stereo Generator and an RDS encoder
FALCON XT is a Digital Audio Processor, a Stereo Generator and an RDS encoder, all in a single device, specifically designed for the market of broadcast FM radio, Web Radio and Satellite.

FALCON XT audio processor is based on a DSP dedicated technology, with a 5-band audio processing architecture.
The Stereo Generator is fully digital and can create a perfect Multiplex signal.

FALCON XT can be completed with a RDS Encoder, DSP-based and fully digital.
FALCON XT allows to create your own soundprint, unique and unmistakable.

- 5-Band Digital Audio Processor
- Analog and AES/EBU input and output over XLR
- Automatic Audio Input Changeover
- 2 composite outputs and 2 AUX inputs
- Mpx Power Control - ITU-R BS.412
- Digital RDS Encoder, 2 Dataset
- Multiband AGC, Speech Detector, 3-Band Eq, Stereo Enhancer, Limiter Lookahead
- Brilliance Control, Expander, Overdrive, Superbass Harmonizer
- Ethernet, Usb, 2 Serials Rs232, GPIn/GPOut
- Gps Interface, NTP, SNMP Agent
- Management via Web Page
- Front headphone output
- Hardware bypass

FALCON XT provides the broadcaster even more demanding, extremely sophisticated audio features and high-level standard: 5-band control compression, dual-band power AGC, three-band EQ and Brightness control.
The Stereo Enhancer parameterized command provide to the radio station sound, the spacing effect and large stereo horizon openings.
The control of the phases of mono audio signals, makes the voice sound more natural, the Expander control allows to minimize the background or unwanted noise, while the Overdrive and the SuperBass dealing to make the sound more important on low and very low frequencies, creating an impressive effect of loudness.
In addition, the SuperBass Harmonizer controls the distortion of the bass sound/low frequency, compared to their clipping, creating a sound impact unmistakable, increasing the energy transmitted by the low frequency and making listening much more pleasant than other audio processors.
The two distinct Final Limiter drives, one broadband and one dedicated only to low frequencies, maximize the presence of the sound, always maintaining a pleasant audio listening.
FALCON XT makes the sound of any single broadcaster unique without creating an artificial sound.

The soundprint of each broadcaster can be created from one of ten preset audio files already on FALCON XT, from rock to classical, country, talk show, or preset audio while preserving the original sound, enhance the character and the unique details.
It is possible to recall a preset using ASCII protocol serial / ethernet port or via GPIn logic state.

The internal RDS encoder available as an option, provides two DataSet, each with a wide range of services including static programmable PS 60 messages, 16 RadioText messages, Alternative Frequency (AF) to receive the best frequency as a function of 'coverage area', the Traffic Program (TP) / Traffic Announcement (TA) to listen to traffic information and functions such as EON, M/S, DI, CT, PI, PTY, PIN.
The switching between the DataSet can occur by serial commands, GPIO or TCP/IP from a radio automation system.
The RDS encoder complies with UECP SPB490.

The connectivity of FALCON XT is complete and manifold.
The rear panel contains XLR connectors for connection of the inputs and outputs in analog and digital AES/EBU.
As regards the part MPX are available two outputs individually buffered and independent for the signal MPX+RDS, plus two additional inputs AUX (SCA) with different functionality.
An AUX input (SCA) expressly intended use of external RDS encoder, while a second input is able to switch the audio from another processor MPX to create a subnet managed by the automation system.
All outputs are equipped with hardware bypass in case of fault of the apparatus.

For remote connections are available an Ethernet TCP/IP port, a RS232 serial port, a USB port and a connection port GPIO with optocouplers and open collector representing the operating states and alarms.

FALCON XT can be controlled remotely via Windows-based client software or through a common http pages thanks to the web server. Universal power supply 90-264Vac 47-63Hz to operate in any region of the world Falcon XT occupies 1 19" rack unit.
Axel Technology
9000 gr.


Følgende produkt(er) er nu lagt i kurven

Køb mere