Axel Falcon 50 FM LCD Broadcast Processor
Axel Falcon 50 FM LCD Broadcast Processor
Axel Falcon 50 FM LCD Broadcast Processor
Axel Falcon 50 FM LCD Broadcast Processor
Axel Falcon 50 FM LCD Broadcast Processor
  • Axel Falcon 50 FM LCD Broadcast Processor
  • Axel Falcon 50 FM LCD Broadcast Processor
  • Axel Falcon 50 FM LCD Broadcast Processor
49.998,75 DKK (39.999,00 DKK)
Du sparer 25,91% Førpris: 67.487,50 DKK (53.990,00 DKK)

Axel Falcon 50 FM LCD Broadcast Processor

Digital audio processor 6 bands FM + MPX Stereo Generator + Stereo Enhancer + Bass Enhancer + ITU-BS412 Power Control + Analog and Digital input/output + 3 SCA inputs + Network split circuit + 50 Factory preset curves + 50 custom preset curves + Preset Scheduling + GP I/O + Front USB connection. LAN card for remote control via TCP/IP
Falcon 50 FM is Axel Technology's flagship digital processor, based on 6-Bands audio architecture, delivering a crystal clear, solid sound texture with a unique superb audio quality.

Whether your audio system contains analog, digital or both formats, Falcon 50 FM can be configured to fit perfectly, featuring the most comprehensive range of processing parameters in its category.

Relying on Axel Technology's extensive know-how in audio engineering techniques, Falcon 50 FM has been specifically designed to provide the best voice processing ever, bone-shaking super bass and spatial stereo enhancement features with advanced peak limiting system, mantaining exceptional audio quality even at extreme settings.

Falcon 50 FM is available in LCD or blind version.

GENERAL
- Dimensions: 3 rack unit, 352 x 483 x 132 mm
- Weight: 8,5 Kg
- AC Rate: 230 Vac 50 Hz / 110 Vac 60 Hz +/-10%
- Power consumpt.: 25 VA
- Type of power supply: Transformer- based
- AC connector: IEC, with detachable 3-wire power cord. EMI-suppressed
- Processing architecture.: DSP-based
- Operating temp. range: - 5 to + 50 °C

AC MAINS FUSE
- Ratings: 315 mA (for 230 Vac), 640 mA (for 115 Vac)
- Dimensions: 5 x 20 mm glass tube
- Type: Timed (slow blow)

FRONT PANEL DESIGN - 'LCD' version
- Display: 2 units, 240 x 128 pixel each, LCD type, monochromatic, LED backlight < br /> - Buttons: 6 backlighted buttons: move left, right, up and down; ESC, Enable for headphone Volume control. 1 Rotary encoder
- Sockets: 1 x USB (B type) ; 1 x ¼" stereo jack for headphones connection

FRONT PANEL DESIGN - 'BLIND' version
- Indicators: 4 LEDs: Power (Blu stable), Operate (Blu flashing), PC Link (Blu), Alarm (Red) < br /> - Sockets: 1 x USB (B type); 1 x ¼" stereo jack for headphones connection

COMPUTER INTERFACE
- Connection capabilities: Serial, Modem , 10/100BaseTX Ethernet. and USB < br /> - Modem: Any dial-up modem - either GSM or Pots - can be connected to Serial Port for remote control. Modem and other external equipment is not supplied. < br /> - Serial Port: 1 Standard RS-232 opto-isolated,38400 Baud < br /> - Universal Serial Bus (USB): Two optoisolated USB 2.0 ports (front + rear) - B type. They are used for connection either to PC, or to PDA for remote control.< br /> - Pc Control Software: Dedicated, running on Windows XP SP2 or Windows 2000 Professional SP4. PDA software included

REMOTE CONTROL - GPI/O INTERFACE
- Inputs: 6, optocoupled, floating < br /> - Outputs: 2 optocoupled < br /> - Connector: SubD 25 pin, EMI suppressed

AUX IN (1,2 AND 3)
- Connector Type: floating BNC, EMI suppressed< br /> - Level: -20dB or 0dB Gain (jumper selectable). < br /> - Input Impedance: > 10 Kohm

SYNC-OUT
- Connector Type: floating BNC, EMI suppressed< br /> - Sync-Out: TTL-level (5Vpp) 19 kHz Pilot Ref. Out

MPX OUTPUTS
- Mpx Outputs: 2, with independent level controls < br /> - Connector Type: BNC, floating, EMI suppressed < br /> - Levels:- 10.0 dBu to + 15 dBu, 0.1 dB step < br /> - Load Impedance: 600 Ohm or greater < br /> - Source impedance: 10 Ohm< br /> - D/A Conversion: Burr Brown PCM1738, 24-bit sigma delta D/A converter < br /> - Maximum Load Capacitance: 5nF < br /> - Mpx Modes: Stereo, Mono, L+R, L-R, Pilot only, No Pilot < br /> - Mpx Clipper: On/Off and adj 95% to 105 %, 1% step < br /> - Mpx attenuators: 2 user-settable attenuation 1 to 100 %, driven by GPI inputs

ANALOG AUDIO INPUT
- Connectors: Two EMI-suppressed XLR female.
- Input Configuration: Stereo / Mono L+R / Mono R / Mono L . Flat or pre-emphasized (at 50μs or 75μs), software-selectable.
- Additional input controls: Swap L/R; Phase Inversion Channel Left, Phase Inversion Channel Right, Phase Rotator, 30 Hz Hi-Pass Filter
- Input impedance: 600 ohms / 10K ohms (default) electronically balanced jumper selectable
- Nominal Input Level: Software adjustable from --10dBu.0 to +15.0 dBu
- A/D Conversion: Crystal Semiconductor CS4272, 24 bit/192Khz delta sigma converter. 128 x oversampled
- Max Input Level: + 24dBu
- Dynamic range: 98 dB RMS (102 dB A weight)
- Input CMRR: 90 dB

AUDIO INPUT CHANGEOVER (either the Analog or the Digital Input can be set as primary)
- Switch Mode: Switch from a software command - Switch from a GPI command - Switch in the event of audio failure
- Fail Time: 5-60Sec (step 5 Sec)
- Fail Conditions: No Signal on Primary input - Primary input under -30 dB Threshold - Left-Right unbalancement of more than 6dB
- Restore Time: 1-10 Sec (step 1 Sec)

DIGITAL AUDIO INPUT
- Connector Type: XLR female & optical toslink. XLR transformer balanced & floating. 110 Ohm impedance
- Input Configuration: Stereo / Mono L+R / Mono R / Mono L. Flat or pre-emphasized (at 50μs or 75μs), software-selectable.
- Additional input controls: Swap L/R; Phase Inversion Channel Left, Phase Inversion Channel Right, Phase Rotator, 30 Hz Hi-Pass Filter
- Formats: AES3/EBU & Spdif
- Input Rates.: 32/44.1/48/64/88.2/96KHz with automatic selection and jitter
Producent:
Axel Technology
Varenummer
FALCON50-FM_LCD
text_Product_Weight
10000 gr.

Tak

Følgende produkt(er) er nu lagt i kurven

Køb mere